FG Series Fiberglass Cooling Towers
Custom Pricing
FG Series Fiberglass Cooling Towers
Overview
The FG Series Cooling Towers offer unparalleled corrosion resistance, energy efficiency, and performance. For cooling requirements at 85°F (29.4°C) and above, water consumption may be reduced by 98.5% through the use of cooling towers to remove process heat. AEC Cooling Tower Systems are used wherever a reduction in water usage, water costs, and/or control of mineral precipitation associated with cooling towers is desired.
Specifications
FG Series Performance
| Model | Capacity¹ tons (kcal/hr) | Fan motor hp (kW) | Amp draw 460/3/60 | Water inlet dia. in. (mm) | Water outlet dia. in. (mm) |
|---|---|---|---|---|---|
| FG2003 | 50 (189,000) | 2 (1.5) | 3.4 | 4 (102) | 4 (102) |
| FG2004 | 75 (283,500) | 5 (3.7) | 7.6 | 2 @ 4 (102) | 6 (152) |
| FG2005 | 100 (378,000) | 5 (3.7) | 7.6 | 2 @ 4 (102) | 8 (203) |
| FG2007 | 125 (472,500) | 5 (3.7) | 7.6 | 2 @ 4 (102) | 8 (203) |
| FG2009 | 150 (567,280) | 10 (7.5) | 14 | 2 @ 4 (102) | 8 (203) |
| FG2011 | 175 (661,500) | 10 (7.5) | 14 | 2 @ 4 (102) | 8 (203) |
| FG2015 | 200 (756,000) | 15 (11.2) | 21 | 2 @ 4 (102) | 8 (203) |
1. Cooling capacity based upon 15,000 BTUH (3,780 Kcal/h) per ton, 3 GPM (11.35 lpm) per ton, 95°F (35°C) inlet water, 85°F (29°C) outlet, and 78°F (26°C) wet bulb air temperature. Consult factory for other requirements.
FG Series Dimensions
| Model | Length (L) in. (cm) | Width (W) in. (cm) | Height (H) in. (cm) | Ship weight lbs. (kgs) | Operating weight lbs. (kgs) |
|---|---|---|---|---|---|
| FG2003 | 64 (163) | 64 (163) | 104 (264) | 600 (273) | 1300 (591) |
| FG2004 | 64 (163) | 64 (163) | 125 (318) | 750 (341) | 1700 (772) |
| FG2005 | 82 (208) | 82 (208) | 121 (307) | 1400 (636) | 2900 (1317) |
| FG2007 | 82 (208) | 82 (208) | 121 (307) | 1500 (681) | 3200 (1453) |
| FG2009 | 100 (254) | 100 (254) | 123 (313) | 1950 (886) | 3800 (1726) |
| FG2011 | 100 (254) | 100 (254) | 123 (313) | 2100 (954) | 4400 (1998) |
| FG2015 | 100 (254) | 100 (254) | 124 (315) | 2600 (1181) | 5200 (2361) |
Fan blade/motor assembly ships loose for field mounting by others.
Features
| Standard Features | Optional Features |
|---|---|
| High efficiency induced-draft design | 460/3/60 or 230/3/60 starter package (starter, on/off switch, thermostat, and well; consult factory for 208V or 575V) |
| Balancing valve and pressure gauge | Basin reservoir (0.75" automatic float valve, water outlet basket strainer, and overflow connection) |
| Factory-tuned fan blade pitch | Heater (with basin reservoir option) to guard against freeze-up when system is shut down |
| PVC fill and drift eliminators with ultraviolet (UV) protection | Factory startup (checking motors, flow, adjusting nozzles) |
| Totally-enclosed non-ventilated (TENV) energy-efficient fan motor | Access ladder, meets OSHA requirements (shipped loose for field installation) |
| Vertical air discharge | Side outlet configuration available at no charge |
| Large inspection/access door | |
| Anti-clog ABS nozzle(s) | |
| Stainless steel hardware | |
| Bottom outlet (requires a 24" [61 cm] minimum support base under the tower) | |
| Lightweight non-corrosive fiberglass shell with fiberglass side seams | |
| Exterior gel coat/UV inhibitor | |
| 2 year warranty on parts | |
| 1 year on fan motors | |
| 1 year warranty on labor (North America only) | |
| 10 year shell warranty |